Quasimidi POLYMORPH - List of the MIDI-Controllers

List of the MIDI-Controllers
All controls of the POLYMORPH are transmitted on MIDI with “MIDI-Controllers”. That way, all
sound changes on the POLYMORPH can be recorded into an external sequencer. In the following
list you can see, which MIDI-Controller is responsible for which parameter on your POLYMORPH.
No.
Parameter Seq.Assignable Mod.Assignable
0 Bank Change (only if RxPrgChg=ON)
1 Modulation Wheel
2 Modulation Line 1
3 Modulation Line 2
4 Modulation Line 3
5 Portamento Time *
7 Volume (Mix)
8 OSC1 Level * *
9 OSC2 Level * *
10 Panorama (Mix) * *
11 VCA Level *
12 Fine Tune *
13 HPF Resonance * *
14 HPF Cutoff Frequency * *
15 Filter Drive * *
16 LPF Cutoff Frequency * *
17 LPF Resonance * *
18 VCA Attack *
19 VCA Decay *
20 VCA Sustain *
21 VCA Release *
23 LPF Env Mod *
24 LPF Dyn Mod *
25 Veloctiy Response
26 LFO3 Depth * *
27 LFO3 Wave *
28 LFO3 Rate * *
29 LFO3->HPF amount *
30 LFO3->LPF amount *
31 LFO3->VCA amount *
33 Dynamic->VCA amount
34 HPF Dyn Mod *
35 LPF Key Follow *
36 PWM Wave *
37 PWM Rate * *
38 PWM Depth * *
39 PWM Delay *
40 FM Wave *
41 FM Rate * *
42 FM Depth * *
43 FM Delay *
44 HPF Attack *
45 HPF Decay *
46 HPF Sustain *
47 HPF Release *
48 HPF Env Mod *
49 LPF Attack *
50 LPF Decay *
51 LPF Sustain *
52 LPF Release *
56
List of the MIDI-Controllers