Quasimidi POLYMORPH - Send Setups - Sending of the Setup Memory; Send All - Send All POLYMORPH Settings

Send setups - Sending of the setup memory
With this function you can send all of the programmed setups over the MIDI interface.
1.) Push [WRITE] to get into the write menu.
2.) By using [PAGE<>] select page 11. The display shows:
<11> Send Setups?
[ok]
3.) Start the recording of the external sequencer, dump utilities etc.
4.) Push [F1] to start the data transfer.
5.) Leave the write menu with [EXIT].
Send all - Send all POLYMORPH settings
With this function you can archive externally the complete memory of the POLYMORPH.
1.) Push [WRITE] to get into the write menu.
2.) By using [PAGE<>] select page 12. The display shows:
<12> Send All?
[ok]
3.) Start the recording of the external sequencer, dump utilities etc.
4.) Push [F1] to start the data transfer.
5.) Leave the write menu with [EXIT].
54
The write menu