Quectel BG95 Series - Usage of TCP;IP at Commands

LPWA Module Series
BG95&BG77&BG600L Series TCP/IP Application Note
BG95&BG77&BG600L_Series_TCP/IP_Application_Note 9 / 56
See the firmware release notes of corresponding module models to check whether the function has been
supported.
1.2. Usage of TCP/IP AT Commands
Through TCP/IP AT commands, the host can configure a PDP context, activate/deactivate the PDP
context, open/close a socket service and send/retrieve data via the socket service. The following
illustrates how to use TCP/IP AT commands.
NOTE