Quectel BG95 Series - AT+QICFG Configure Optional Parameters

LPWA Module Series
BG95&BG77&BG600L Series TCP/IP Application Note
BG95&BG77&BG600L_Series_TCP/IP_Application_Note 31 / 56
Parameter
2.3.15. AT+QICFG Configure Optional Parameters
This command configures optional parameters.
.AT+QIDNSGIP Get IP Address by Domain Name
Test Command
AT+QIDNSGIP=?
Response
+QIDNSGIP: (range of supported <contextID>s),<host_name>
OK
Write Command
AT+QIDNSGIP=<contextID>,<ho
st_name>
Response
OK
+QIURC: "dnsgip",<result>,<IP_count>,<DNS_ttl>
[.....
+QIURC: "dnsgip",<host_IP_addr>]
If there is any error:
ERROR
Maximum Response Time
60 s, determined by the network.
Characteristics
/
<contextID>
Integer type. Context ID. Range: 1–16.
<host_name>
String type. Domain name.
<result>
Integer type. Result code of the operation. See Chapter 4 for details.
<IP_count>
Integer type. Number of the IP addresses corresponding to the <host_name>.
<DNS_ttl>
Integer type. Time to live of the DNS.
<host_IP_addr>
String type. IP address of <host_name>.
AT+QICFG Configure Optional Parameters
Test Command
AT+QICFG=?
Response
+QICFG: "transpktsize",(range of supported <transpkt_size>s)
+QICFG: "transwaittm",(range of supported <transwaittm>s)
+QICFG: "dataformat",(list of supported
<send_data_format>s),(list of supported <recv_data_format>s)
+QICFG: "viewmode",(list of supported <view_mode>s)
+QICFG: "recvind",(list of supported <recv_ind>s)
+QICFG: "sack",(list of supported <SACK>s)
+QICFG: "tcp/keepalive",(list of supported <keepalive>s),(range
of supported <idle_time>s),(range of supported