Quectel BG95 Series - Page 33

LPWA Module Series
BG95&BG77&BG600L Series TCP/IP Application Note
BG95&BG77&BG600L_Series_TCP/IP_Application_Note 32 / 56
<interval_time>s),(range of supported <probe_cnt>>s)
+QICFG: "tcp/retranscfg",(range of supported
<max_backoffs>s),(range of supported <max_rto>s)
OK
Write Command
Query/set the packet size for
transparent transmission mode
AT+QICFG="transpktsize"[,<tran
spkt_size>]
Response
If the optional parameter is omitted, query the current setting:
+QICFG: "transpktsize",<transpkt_size>
OK
If the optional parameter is specified, set the packet size for
transparent transmission mode:
OK
Or
ERROR
Write Command
Query/set the waiting time for
transparent transmission mode
AT+QICFG="transwaittm"[,<tran
swaittm>]
Response
If the optional parameter is omitted, query the current setting:
+QICFG: "transwaittm",<transwaittm>
OK
If the optional parameter is specified, set the waiting time for
transparent transmission mode:
OK
Or
ERROR
Write Command
Query/set the format of the data to
be sent and received (only for
buffer access mode and direct
push mode)
AT+QICFG="dataformat"[,<send
_data_format>,<recv_data_form
at>]
Response
If the optional parameter is omitted, query the current setting:
+QICFG: "dataformat",<send_data_format>,<recv_data_form
at>
OK
If the optional parameter is specified, set the format for the data to
be sent and received:
OK
Or
ERROR
Write Command
Query/set the output format of
received data (only for
non-transparent mode)
AT+QICFG="viewmode"[,<view_
Response
If the optional parameter is omitted, query the current setting:
+QICFG: "viewmode",<view_mode>
OK