Quectel BG96 TCP/IP - Page 29

LPWA Module Series
BG96 TCP/IP Application Note
BG96_TCP/IP_Application_Note 28 / 52
+QICFG: "dataformat",(list of supported <send_data_format>
s),(list of supported <recv_data_format>s)
+QICFG: "viewmode",(list of supported <view_mode>s)
+QICFG: "recvind",(list of supported <recv_ind>s)
+QICFG: "prefix",<IPv6_prefix>,(list of supported <prefix_len
gth>s)
+QICFG: "tcp/retranscfg",(range of supported <max_backoff
s>s),(range of supported <max_rto>s)
+QICFG: "tcp/keepalive",(list of supported <keepalive>s),(ran
ge of supported <idle_time>s),(range of supported <interval_t
ime>s),(range of supported <probe_cnt>>s)
+QICFG: "ipv6prior",(list of supported <IPv6_prior>s)
OK
Write Command
Query/set the packet size for
transparent access mode
AT+QICFG="transpktsize"[,<tran
spkt_size>]
Response
If the optional parameter is omitted, query the current setting:
+QICFG: "transpktsize",<transpkt_size>
OK
If the optional parameter is specified, set the packet size for
transparent access mode:
OK
If there is any error:
ERROR
Write Command
Query/set the waiting time for
transparent access mode
AT+QICFG="transwaittm"[,<tran
swaittm>]
Response
If the optional parameter is omitted, query the current setting:
+QICFG: "transwaittm",<transwaittm>
OK
If the optional parameter is specified, set the waiting time for
transparent access mode:
OK
If there is any error:
ERROR
Write Command
Query/set the format of the data to
be sent and received (only for
buffer access mode and direct push
mode)
AT+QICFG="dataformat"[,<send
Response
If the optional parameters are omitted, query the current setting:
+QICFG: "dataformat",<send_data_format>,<recv_data_form
at>
OK