LPWA Module Series
BG950A-GL&BG951A-GL_Hardware_Design
26
/89
2.6. Evaluation Board
To help customers to develop applications with the module conveniently, Quectel supplies an
evaluation board (EVB), USB to RS-232 converter cables, USB data cables, earphone, antennas, and
other peripherals to control or to test the module. For more details, refer to document [1].
up normally, in order to ensure full-function mode, the minimum power supply voltage should be
higher than 2.2 V.
2. ADC input voltage must not exceed 1.8 V.
3. Keep all RESERVED pins and unused pins unconnected.
4. PCM and I2C interfaces are for VoLTE* only.
To Next Page
Loading...
