Quectel NB-IoT Series - Operation Procedures; Operation Procedure with a Single Board

NB-loT Module Series
BC660K-GL-TE-B User Guide
BC660K-GL-TE-B_User_Guide 14 / 30
3 Operation Procedures
The BC660K-GL-TE-B development board can be used alone to upgrade firmware and debug applications
developed based on the BC660K-GL module. It can also be used in conjunction with an STM32 Nucleo-
64 development board via the Arduino interface to develop NB-IoT applications based on STM32. In such
two cases, the assembly procedures are different.
Besides, when you use the board to test the power consumption of the BC660K-GL module, the operation
procedure is different from that in other cases as certain modifications need to be made.
This chapter illustrates in turn how to operate or modify BC660K-GL-TE-B for its being used alone, in
conjunction with a STM32 Nucleo-64 board, or to test the power consumption of the BC660K-GL module.
3.1. Operation Procedure with a Single Board
This section elaborates the operation procedure for using BC660K-GL-TE-B alone.