UMTS/HSPA Module Series
UC20 PPP Application Note
UC20_PPP_Application_Note Confidential / Released 28 / 29
7 Appendix A Reference
Table 1: Related Documents
Table 2: Terms and Abbreviations
Quectel_UC20_AT_Commands_Manual
AT Commands Manual for UC20
Point-to-Point Protocol, The Point-to-Point Protocol is designed for simple
links which transport packets between two peers. These links provide
full-duplex simultaneous bi-directional operation, and are assumed to deliver
packets in order. It is intended that PPP provides a common solution for easy
connection of a wide variety of hosts, bridges and routers.
Universal Asynchronous Receiver Transmitter. Integrated circuit which works
with serial ports converting incoming serial data from a serial port into
parallel form and parallel data to serial form when sending out data through a
serial port (Computers, Electronics).
Challenge Handshake Authentication Protocol
General Packet Radio Service
Global System of Mobile Communication