Need help?Do you have a question about the Quectel UC20 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Form Factor | LGA |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -45°C to +90°C |
| GSM | 850/900/1800/1900 MHz |
| SIM Card Interface | 1.8V/3V |
| Cellular Technology | UMTS |
| UMTS | 850/900/1900/2100 MHz |
| Interface | UART, USB, GPIO, I2C |
| Antenna Interface | Diversity |
| Protocols | TCP/IP, UDP, FTP, HTTP, MQTT |
| Certifications | CE, FCC, PTCRB, GCF, IC, NCC, RCM, ANATEL |
Outlines essential safety precautions for users and operators when handling and using the UC20 module.
Describes pins for Power Supply, Turn On/Off, Status Indication, and USB interface.
Details pin definitions for USIM card and ADC interfaces.
Covers pin definitions for the main and debug UART interfaces.
Details pin definitions for RF, PCM audio, and I2C communication interfaces.
Describes other functional pins like WAKEUP_IN and reserved pins.
Identifies VBAT and GND pins and provides guidance on managing voltage drops.
Presents a reference circuit design for a +5V input power source.
Explains how to turn on the module using the PWRKEY pin, including circuits and timing.
Details procedures for turning off the module via PWRKEY, AT command, and automatic shutdown.
Provides reference circuits for translating UART interfaces and RS-232 level matching.
Lists key GNSS performance parameters such as sensitivity, TTFF, and accuracy.
Lists the absolute maximum ratings for power supply and voltage on various pins of the module.
Specifies power supply ratings and details operating temperature ranges for the UC20 module.
Provides current consumption values for the module in various states like OFF, Sleep, Idle, and Data Transfer.
Lists RF output power and conducted RF receiving sensitivity specifications.
Details the electrostatic discharge (ESD) characteristics for module interfaces.
To Next Page
