Need help?Do you have a question about the Quest Engineering AQ5000 Pro and is the answer not in the manual?
General| Configuration | Flat |
|---|---|
| Display Size | 27 inches |
| Panel Type | IPS |
| Brightness | 350 cd/m² |
| VESA Mount | 100 x 100 mm |
| HDR | HDR400 |
| Curved | No |
| Contrast Ratio | 1000:1 |
| Color Gamut | 95% DCI-P3 |
| Ports | 2x HDMI 2.0, 1x DisplayPort 1.4, 1x USB-C, 3.5mm Audio Jack |
| Adaptive Sync | AMD FreeSync |
Explains using AC power adapter and internal batteries for operation.
Covers replacing AA batteries and installing the optional rechargeable battery pack.
Details on setting the real-time clock and selecting measurement channels.
Information on the factory-programmed default settings for recording.
Step-by-step guide for turning the IAQ monitor on/off and viewing information.
Instructions for calibrating the CO2 sensor, including zero and span adjustments.
Guide to starting, stopping, viewing, and outputting recorded test data.
Procedures for clearing recorded data and enabling/disabling secure mode.
Lists common abbreviations and provides diagrams for AQ5000 and AQ5001 models.
Covers connecting, calibrating CO2, toxic gas, and oxygen sensors.
Details linear input, airflow measurements, viewing data, recording, and secure mode.
Instructions for outputting reports directly to a computer and printing hard copies.
Detailed technical specifications for CO2, Humidity, Temperature, and Toxic Gas channels.
Covers Linear Channel, Air Probe, data storage, display, power, and communication.
Information on operating/storage conditions, physical dimensions, and weight.
Information on how to find a complete list of currently available accessories.
To Next Page