Chapter 3 Detailed Operating Instructions
35
Clearing Data From the IAQ Monitor
To erase all recorded test data from the IAQ Monitor:
1. Turn the IAQ Monitor on. It will display the Main Screen.
2. Press the UP ARROW button and the following screen will be
displayed:
Press RECORD
For Function Menu
t/u To Continue
4. Press the RECORD button and the following screen will be
displayed:
t/u For Choices
RECORD Selects
***** Clear Data *****
Press ON/OFF To Exit
5. Press RECORD. The following menu will appear:
Press RECORD to
Clear Data
Press ON/OFF To Exit
6. Press RECORD. The unit will respond with “Data Cleared” and
return to the top Record Menu.
NOTE: Data can also be cleared using Quest Suite Professional.
To Next Page
Loading...
Need help?
General