Table Of Contents
Chapter 1: Getting Started ----------------------------------------------------------------------- 1
Using AC Power And The Internal Battery ------------------------------------- 1
Replacing The Internal AA Batteries --------------------------------------------- 1
Optional Battery Pack ---------------------------------------------------------------- 2
Setting The Real Time Clock ------------------------------------------------------- 4
Selecting Channels ------------------------------------------------------------------- 4
Default Recorder Setup -------------------------------------------------------------- 5
Chapter 2: Quick Tutorial -------------------------------------------------------------------------- 6
Turning The IAQ Monitor On and Off --------------------------------------------- 6
Calibrating the CO
2
Sensor --------------------------------------------------------- 6
Viewing Information with the IAQ Monitor --------------------------------------- 9
Start And Stop Recording ----------------------------------------------------------- 9
Output Reports ------------------------------------------------------------------------- 10
Clearing Data From the IAQ Monitor --------------------------------------------- 10
Chapter 3: Detailed Instructions ----------------------------------------------------------------- 12
Abbreviations --------------------------------------------------------------------------- 12
Aq – 5000 Pro Diagram -------------------------------------------------------------- 13
Aq – 5001 Pro Diagram -------------------------------------------------------------- 14
Multi-Function “Y” Cable ------------------------------------------------------------- 15
Turning The IAQ Monitor On and Off --------------------------------------------- 15
Connecting and Calibrating Sensors --------------------------------------------- 17
CO
2
, Temperature and Humidity Sensors -------------------------------------- 17
Calibrating The CO
2
Sensors ------------------------------------------------------ 17
Toxic Gas Sensors ------------------------------------------------------------------- 20
Biased Sensors ----------------------------------------------------------------------- 21
Installing a Gas Sensor ------------------------------------------------------------- 21
Calibrating A Gas Sensor ---------------------------------------------------------- 22
Preparing for Calibration ----------------------------------------------------------- 22
Toxic Gas Zero ------------------------------------------------------------------------ 23
Toxic Gas Zero – In An Area Free Of Gasses -------------------------------- 24
Toxic Gas Zero – Using Zero Gas ----------------------------------------------- 24
Toxic Gas – Span Calibration ----------------------------------------------------- 25
Oxygen Zero Adjustment ----------------------------------------------------------- 25
Oxygen Span Adjustment ---------------------------------------------------------- 27
Linear Input Sensor ------------------------------------------------------------------ 28
Airflow Measurements --------------------------------------------------------------- 28
Batteries For Air Probe 20 ---------------------------------------------------------- 29
Helpful Hints For Calibrating Sensors ------------------------------------------- 28
Viewing Information with the IAQ Monitor -------------------------------------- 30
Start and Stop Recording ----------------------------------------------------------- 32
Outputting Reports Directly to a Computer ------------------------------------- 33
Hard Copy (Printing A Report) ----------------------------------------------------- 34
Clearing Data From the IAQ Monitor --------------------------------------------- 35
Secure Mode -------------------------------------------------------------------- 36
To Next Page
Loading...