Cache Mode is specifically
designed for detecting
deeper targets, making it
ideal for treasure hunters
seeking older, more deeply-
buried items. By default, it
comes with a Recovery
Speed set at 1, the lowest setting, which
increases the detector's depth sensitivity. This
enables the device to pick up signals from
deeper objects that other modes might miss.
However, the lower Recovery Speed also has its
drawbacks. It makes the detector more
susceptible to false signals from mineralized soil
or other kinds of interference. It also slows down
the response time, which could make pinpointing
smaller, closer targets more challenging.
Tips for Using Cache Mode:
Use Cache Mode in areas where you expect to
find deeper, older targets, like historical sites.
Due to the slow Recovery Speed, it's essential to
move the coil more slowly over the ground to
ensure accurate detection.
Gold Mode is specifically
engineered for the
challenging conditions of
mineralized goldfields.
Unlike other modes, it
features a continuous
background threshold
tone, aiding in the detection
of both shallow, small gold nuggets and deeper,
larger ones. The audio alerts in this mode are
dynamic; their volume and frequency change in
proportion to the strength of the target signal,
making it easier to gauge the size and depth of
detected objects.
The mode allows for the use of high single
frequencies like 40kHz or 60kHz, as well as Multi
frequency.
By default, Gold Mode operates at a Recovery
Speed of 5 and uses continuous tone. This
configuration aims to pinpoint valuable targets
amidst the mineralized ground noise. Whether
you're searching for small, surface-level nuggets
or deeper, larger pieces, Gold Mode offers a
specialized, effective toolset for navigating the
complexities of goldfield terrains.
Beach Mode is
meticulously designed for
metal detecting in various
beach environments, from
dry sand to underwater
conditions up to 15feet/
5M. The mode is especially useful in tackling the
challenges posed by high salt content and black
sand, which can interfere with accurate target
identification. Unlike single-frequency detectors
that struggle in these environments, Beach Mode
employs HyperQ technology to minimize noise
from salt and achieve maximum performance.
Another unique feature is the black sand
detection. Beaches with black sand, rich in
natural iron, make metal detection extremely
challenging. In such cases, Beach Mode
automatically senses the presence of black sand
and displays high mineral+saltwater presence,
allowing you to adjust your strategy accordingly.
This mode is ideal for saltwater beaches, offering
a high Recovery Speed to minimize saltwater
interference without sacrificing depth. Overall,
Beach Mode provides a comprehensive solution
for efficient and effective treasure hunting in
some of the most challenging terrains.
To Next Page
Loading...
