Ⅲ. Connection and fix
4
Ⅲ. Connection and Fix
3.1 Fix
It has 8 install fixing holes at unit’s bottom. It can prevent the unit from being move, or falling down by reliablly
fixing the unit on the table with M5 hexagon screws. The installing dimension as follows:
Caution: it must fix the unit reliably to protect the operator and unit from accident.
3.2 Input/Output Connect
1. After fixed the unit on the workbench reliablly, it can connect the IO singal cords.
2. The soldering handle is the only moving axis and its movement process can refer 3.4.
3. In order to avoid air leakage, the two cylinder air connectors need to be blocked when not using.
3.3 Socket Instruction
3.3.1 I/O Socket Instruction
Fixing hole
To Next Page
Loading...