3.17 Calling up/modifying service timer settings
Calling up/modifying service timer settings
Starting from the Main screen:
•
Press Scroll button (12) until <P. 4> is shown and then press Enter button (13): the setting of the service
timer is shown in <hrs> (hours) or <x1000 hrs> (hours x 1000). Example: <4000 hrs> means the timer is
set at 4000 running hours.
• Press Enter button (13) to modify this value (a password may be required): the value starts blinking. Use
the Scroll buttons (12) to modify the setting.
• Press Enter button (13) to program the new value.
• Press Escape button (14) to return to the parameter screen.
3.18 Calling up/modifying the unit of temperature
Calling up/modifying unit of temperature
Starting
from
the
Main
screen,
press
Scroll
button
(12)
until
<P.
5>
is
shown
and
then
press
Enter
button
(13).
The actually used unit is shown. Possible settings are <˚C> and <˚F>.
Instruction book
2920 7103 90 31
To Next Page
Loading...