EasyManuals Logo

R-Biopharm KOBRA CELL User Manual

R-Biopharm KOBRA CELL
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
R-Biopharm Rhone Ltd
2.1 Contents
1 x KOBRA® CELL
1 x Power Pack (including 1 red and 1 black
connection lead)
1 x Electrical adapter (with various adapters)
1 x 1 m length of 0.5 mm ID PEEK
TM
tubing
1 x Spare membrane
2.2 Reagents Required
Distilled Water
Methanol
Potassium Bromide
Nitric Acid
2.3 Accessory Products
1 x KOBRA® CELL Installation Pack
(Product Code: K03)*
Guard column: Inertsil ODS-3, 5 µm,
4 mm x 10 mm or equivalent
* Available from R-Biopharm. Please
contact your local distributor for further
information.
2.4 Hazards
Mycotoxins are very hazardous substances. Only
laboratories equipped to handle toxic materials
and solvents should perform analyses. Suitable
protective clothing, including gloves, safety glasses
and lab coats should be worn throughout the
analysis.
2.5 Decontamination
Prior to disposal, excess standard solutions should
be treated with at least one-tenth their volume of
5 % sodium hypochlorite. Labware and
contaminated waste should be immersed in
5 % sodium hypochlorite solution for 30 minutes
followed by the addition of 5 % acetone for
30 minutes. Flush with copious amounts of water
before disposal. After decontamination labware
should be thoroughly washed. Incinerate waste if
regulations permit.
2
KOBRA
®
CELL Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the R-Biopharm KOBRA CELL and is the answer not in the manual?

R-Biopharm KOBRA CELL Specifications

General IconGeneral
BrandR-Biopharm
ModelKOBRA CELL
CategoryMeasuring Instruments
LanguageEnglish