EasyManua.ls Logo

Raddy WF-60C - Alarm Clock Setting; Snooze Function

Raddy WF-60C
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WF-60C WEATHER STATION
Check the Set Alarm Time: In standard mode, short press the
ALARMbutton to check the set alarm time. It will return to normal
time display mode if no operation in 5 seconds.
Turn On/Off the Alarm Clock: In standard mode, short press the
ALARMbutton and the LCD will display the set alarm time. If there’s
an alarm icon beside the alarm time, the alarm is on. If there’s no alarm
icon, the alarm is off. Press theALARMbutton again can turn on/off
the alarm. It will save your setting and return to normal time display
mode if no operation in 5 seconds.
Set Daily Alarm Clock:
1.
2.
3.
ALARM CLOCK SETTING
When the alarm is ringing, press any button except theSNOOZE/
LIGHTbutton can stop the alarm for the day. And the alarm will restart
the next day. The alarm sound will last for 2 minutes if no button is
pressed.
1.
SNOOZE FUNCTION
Press and hold theALARMbutton to enter the Alarm Clock
Setting Mode. The Hour starts to flash. Use the+/RCCand-
buttons to set the correct hour.
Short press theALARMbutton, the Hour will be saved and the
Minute starts to flash. Use the+/RCCand-buttons to set
the correct minute.
Short press theALARMbutton again, the alarm clock will be
saved.
*Press and hold+/RCCand-buttons will quickly change the
value by 8 steps.
*If the alarm clock can’t be set, check if the base station is in RCC
Receiving Mode and exit back to standard mode by long pressing the
+/RCCbutton.
13

Related product manuals