Raddy WF-60C - Temperature; Humidity

WF-60C WEATHER STATION
After power on, the indoor temperature will display automatically, it will
update reading every 30 seconds and the base station will start to
receive signals from the remote sensor which lasts for a maximum of
3 minutes.
Indoor temperature display range: -10℃~ 50.0℃ (14℉~ 122℉)
For temperature lower than -10℃, the reading will be: “LL.L”.
For temperature higher than 50.0℃, the reading will be: ”HH.H”.
Outdoor temperature display range :-40℃~ 60℃ (-40℉~140℉)
For temperature lower than -40℃, the reading will be: “LL.L”.
For temperature higher than 60℃, the reading will be: “HH.H”.
Arrow indication for temperature changes:
will display when the reading increase by 1℃ (1.8℉) within one
hour or compared with last reading.
will display when the reading decrease by 1℃ (1.8℉) within one
hour or compared with last reading.
Accuracy: ±1℃ (±2℉). Temperature resolution is 0.1℉(0.1℃).
In standard mode, press the【SET】button to select °C or °F units.
1.
2.
3.
4.
5.
6.
TEMPERATURE
After power on ,the indoor humidity will display automatically, it will
update the reading every 30 seconds and the base station will start to
receive signals from the remote sensor which lasts for a maximum of 3
minutes.
Humidity display range: 1%-99%.
For humidity lower than 1%, the reading will be “1%”.
For humidity higher than 99%, the reading will be “99%”.
Accuracy: when the temperature is between 68℉~78.8℉ (20℃~26
℃) and the humidity is between 40-80%, the accuracy is ±5%. The
accuracy will be ±8% if out of this range.
1.
2.
3.
HUMIDITY
15