EasyManua.ls Logo

Raddy WF-60C - Barometer Calibration

Raddy WF-60C
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WF-60C WEATHER STATION
Max/Min memory records for all indoor/outdoor temperature and humidity
Trend index
C/F(Celsius/Fahrenheit) switchable
Comfort dashboard
Low battery indicator
Key tone on/off
Transmission range: up to 100 meters/330 feet in open area
3-mode brightness: Bright/Dim/Off
Support desk standing or wall hanging
After powering on, the pressure reading will be flashing for 10 seconds.
If there is no need for calibration, pressSNOOZE/LIGHTbutton to exit
setting. If calibration is required, you can press+/RCCor-
buttons to adjust data. Press and hold+/RCCand-buttons will
quickly change the value by 8 steps.
If no operation within 10 seconds, it will automatically save and exit
setting.
Barometer range: 850-1050hPa/mb (600-832mmHg, 23.62-32.75inHg).
Arrow indication for humidity changes:
will display when the reading increase by 2mb, within one hour or
compared with last reading.
will display when the reading decrease by 2mb, within one hour or
compared with last reading.
will display when the reading changes less than 2mb, within one
hour or compared with last reading.
1.
2.
3.
4.
BAROMETER CALIBRATION
07

Related product manuals