sensors to 1, 2, 3 and install the batteries respectively. The base station
will detect the RF signals from the remote sensors for a maximum of 3
minutes, and the signal icons on the outdoor channel dashboard will
keep flashing during detection until it connects with the sensor.
Finally, it will enter the RCC (Radio Control Clock) reception mode for 7
minutes. Once the signal is received, the LCD will display the received
time/month/date/weekday.
5.
WF-60C WEATHER STATION
MAIN UNIT
1. Temperature and Humidity of Channel 1
2. Max/Min Record of Outdoor Channels
3. Low Battery Indicator for Base Unit
4. Max/Min Record of Base Unit
5. Indoor Temperature and Humidity
6. Trends Indicator for Indoor Temperature and Humidity
7. Barometer Air Pressure
OVERVIEW
1
2
3
4
5 6 7 8 9 10 11 12
13
14
15
16
17
18
19
2021
04
To Next Page
Loading...
