Radio Shack 12-261 - Page 23

Operation
23
5. Press
e
or d to select the desired
alarm minutes.
6. Press
g
to confirm. A beep sounds.
7. Press
CLOCK to enter clock setting
mode. If you have not set the clock
before,
--:-- appears.
8. Hold down
CLOCK for about two
seconds and release. The clock
hour digits flash.
9. Press
e
or d to select the desired
clock hour.
PM appears to indicate
a PM hour.
10. Press
g
to confirm. The minute
digits flash.
11. Press
e
or
d
to select the desired
clock minutes.
12. Press
g
to confirm. A beep sounds
and the newly set clock time
appears on the display.
13. Slide
ALARM ON/OFF/SNOOZE to
the desired alarm function.
É
disappears when set to
OFF, and
É appears when set to ON or
SNOOZE.
14. If set to
ON or SNOOZE and alarm
time is reached, the alarm sounds.