OWNER’S MANUAL
Features And Functions 5
DEVICE TABLE
NOTE: Please refer to the table below when
performing the instructions in “Programming Device
Control” on page 6.
After programming, the RadioShack 6-in-1 Easy
Setup Voice Remote will be able to control the
following types of devices:
SETUP MENU OVERVIEW
Your new RadioShack 6-in-1 Easy Setup Voice
Remote includes an audio menu to help guide you
through setup options. Press and hold SETUP to
hear the top-level menu through the speaker on the
front of the remote. Once you’ve accessed the top-
level menu), press VOLSor VOLTto increase or
decrease the volume of the product’s voice. The
main setup menu options are:
• “Press one to set up a device, such as TV or
Cable/SAT.”
See “Programming Device Control” on page 6.
• “Press two to set up favorite channels.”
See “Programming Favorite Channel Scan” on
page 7.
• “Press three to program multiple commands,
known as a macro.”
See “Programming a Macro” on page 8.
• “Press four to enable sleep.”
See “Enabling Sleep” on page 9
• “Press five for learning.”
“Programming a Learned Key” on page 9
•“Press six for volume lock.”
See “Locking Volume Control to One Mode
(Global Volume Lock)” on page 10.
• “Press seven to reassign a device key.”
See “Reassigning Device Keys” on page 11.
• “Press eight to reset the remote.”
See “Resetting the Remote” on page 11.
Use the number pad to select any of these setup
options. After you select an option, more
instructions will be provided. See the sections listed
above for details.
In the CBL/SAT, VCR, or DVD
modes, use the PVR/DVR
Keys as follows:
Press the REPLAY key to
instantly replay the last 7
seconds of a program you
are watching (if the feature is
available).
Press the ADV key to skip
past commercials or other
uninteresting scenes (if the
feature is available).
In the DVD or CD mode, press
the advance key to change
discs.
Press LIVE TV to switch
between live TV and video
programming (if the feature
is available).
Press BACK to replay the
previous setup command
menu. Press and hold BACK
for 3 seconds to completely
exit programming at any
time.
Press SETUP to program
your remote. See “Setup
Menu Overview” on page 5
for more information.
Press REPEAT to replay the
current voice command
menu.
DEVICE KEY CONTROLS THESE DEVICES
Audio Amplifier, Audio Receiver,
or CD Player
Cable Box (Converter), Satellite
Receiver, Cable/PVR, or Satellite/
PVR Combo
Tel ev ision, T V / VC R Comb o, T V/
VCR/DVD Combo, or TV/DVD
Combo
Audio Amplifier, Audio Receiver,
or CD Player
VCR, DVD, Home-Theater-in-a-
Box, or PVR (DVR)
VCR, DVD, Home-Theater-in-a-
Box, or PVR (DVR)
DEVICE KEY CONTROLS THESE DEVICES
RS 6in1 Easy Setup Owners Manual.fm Page 5 Wednesday, December 15, 2004 10:31 AM
To Next Page
Loading...
Need help?
General
