Radio Shack 22-168A - Using Advanced Functions; Auto-Hold and Data Hold Features

USING THE ADVANCED FUNCTIONS
USING THE AUTO-HOLD FEATURE
(72:
When you first tum on the meter, A-H appears
in the upper left comer of the display to indicate
that the auto-hold feature is tumed on. When this
feature is tumed on, the secondary display shows
the reading taken 4 seconds earlier. To tum off
this feature, press FUNCTION to select one of
the other advanced functions.
USING THE DATA HOLD FEATURE
The data hold feature lets you hold a reading
on the display.
To tum on the data hold feature, press FUNCTION
until D-H appears at the top of the display. Both
the main and secondary displays show the cur-
rent reading. To hold a reading on the secondary
display, press SET/RESET. The main display
continues to track the current measurement.
Press SET/RESET to release the measurement
and return to the auto-hold function. Or, press
FUNCTION to select another advanced feature.