Radio Shack 22-168A - Storing and Recalling Measurements

STORING MEASUREMENTS IN
MEMORY
Follow these steps to store up to ten measured
values in memory for later recall.
1. Select the measurement type and range with
the rotary selector.
2. Repeatedly press FUNCTION until MEM
appears at the top of the display.
3. Repeatedly press UP or DOWN until the
secondary display shows the number of the
memory you want to store a value in.
4. While making a measurement, press SET/
RESET to store the current measurement.
K 3)
RECALLING STORED
MEASUREMENTS
Follow these steps to recall a measured value
from one of the ten memories.
1, Repeatedly press FUNCTION until RCL
appears at the top of the display.
2. Repeatedly press UP or DOWN until the
memory you want to recall appears in the
secondary display.
3. Press SET/RESET. The stored value appears
in the secondary display.