21
Follow these steps to mount the Weatheradio on a
wall.
1. Select a mounting location near the AC outlet,
then drill two holes 2
1
/
8
inches apart. Then thread
a screw into each
mounting hole until
the head extends
about
1
/
8
inch from the
wall.
2. Insert the tabs on the
bracket into the slots
on the Weatheradio.
Then, while making
sure any connected
cords (power and so
on) are aligned with
the cutouts in the
bracket, press the
bracket toward the
Weatheradio until it
clicks into place.
3. Align the keyhole slots
in the mounting
bracket with the
screws on the wall-
Press the weatheradio
toward the wall then
down to secure it.
SINGLE
ALERT TONE
MULTIPLE
CAT. NO.12-249
FCC ID: AAO12-249
FREQUENCY : 1-162.400MHz 2-162.425MHz 3-162.450MHz
4-162.475MHz 5-162.500MHz 6-162.525MHz 7-162.550MHz
POWER SUPPLY :AC 120V 60Hz 5W
Custom Manufactured in China for RadioShack, A Division
of Tandy Corporation, Fort Worth, Texas 76102
L
I
S
T
E
D
1
2
8
H
R
A
D
I
O
®
®
SERIALNO
.
Cutouts
12-249.fm Page 21 Tuesday, July 6, 1999 4:00 PM
To Next Page
Loading...
Need help?
General
