20
CHOOSING A LOCATION AND
MOUNTING THE WEATHERADIO
You can set your Weatheradio on any flat surface
(such as a shelf or counter top), or you can mount it
on a wall using the supplied mounting bracket and
two screws (not supplied) with heads that fit the key-
hole slots on the mounting bracket.
For your Weatheradio to be effective, however, be
sure you place the Weatheradio where:
• It can receive alert signals (see “When a Test or
Demo Alert Occurs” on Page 33)
• You can hear its alert tone (see “Setting the Alert
Volume” on Page 25)
Note:
You can also connect the Weatheradio to an
external module interface, then set the interface to in-
dicate an alert (sound a buzzer or flash a light, for ex-
ample) on a connected appliance when the
Weatheradio receives an emergency alert broadcast.
See “Connecting the Weatheradio to an External Sys-
tem” on Page 38.
12-249.fm Page 20 Tuesday, July 6, 1999 4:00 PM
To Next Page
Loading...
