24
USING THE ALERT FUNCTION
To set the Weatheradio to sound an alert when the
NWS broadcasts a weather warning, watch, or state-
ment for the FIPS code(s) stored in its memory, press
ALERT
so
WEATHER
(then)
ALRT
ON
appears.
Notes:
• If you programmed more than one FIPS code
into memory, be sure
SINGLE/MULTIPLE
is set to
MULTIPLE
. Otherwise, the Weatheradio will only
receive broadcasts for the FIPS code you stored
in the first memory position.
• If severe weather threatens, do not wait for an
alert tone; turn on the weather broadcast and
monitor the weather information.
To set the Weatheradio so it does not sound an alert,
press
ALERT
again so
WEATHER
ALRT
OFF
ap-
pears.
STATEMENT
WATCH WARNING
ALERT LEVEL
OFF
VOLUME
MAX
OFF
WEATHER ALERT
12-249.fm Page 24 Tuesday, July 6, 1999 4:00 PM
To Next Page
Loading...
