26
(Continuous) ALERT
— the Weatheradio sounds an
alert and displays an alert description until the alert’s
effective time expires.
The Weatheradio automatically selects the VOICE
setting the first time you turn it on. To change the alert
pattern setting (or check which setting is currently se-
lected), follow these steps.
1. Set
PROGRAM/OPERATE
to
PROGRAM
.
Note:
If you do not press a key for about 45 sec-
onds during Steps 2–4, the Weatheradio exits
the programming mode without storing any
change. To continue, set
PROGRAM/OPERATE
back to
OPERATE
, then start over at Step 1.
2. Press
YES
once. The Weatheradio shows the
currently selected alert pattern (
VOICE
or
ALERT
).
3. To select the other setting, press
NO
so that set-
ting (
VOICE
or
ALERT
) appears.
4. Press
YES
again to store your selection, then set
PROGRAM/OPERATE
to
OPERATE
. The current
alert status appears.
STATEMENT
WATCH WARNING
ALERT LEVEL
OFF
VOLUME
MAX
4
7 8
5
6
9
NO
0
YES
OFF
WEATHER ALERT
12-249.fm Page 26 Tuesday, July 6, 1999 4:00 PM
To Next Page
Loading...
Need help?
General
