41
No weather broad-
cast when you
press
WEATHER
.
Ensure that the telescoping
antenna is fully extended.
See “Using the Antenna” on
Page 11.
If you connected an external
antenna, ensure that it is con-
nected properly and the telescop-
ing antenna is lowered.
See “Connecting an External
Antenna” on Page 11.
Ensure the Weatheradio is set to
the NOAA channel that is being
broadcast in your area.
See “Programming the Weathera-
dio” on Page 14
One or more FIPS
codes are stored in
memory, but the
radio responds to
weather alert
broadcasts for
areas
not
covered
by those codes.
Ensure the Weatheradio’s all-sig-
nals code (99) is not stored in
memory.
See “Using the Weatheradio’s ‘All
Signals’ Code” on Page 19.
Problem(s) Suggestion(s)
12-249.fm Page 41 Tuesday, July 6, 1999 4:00 PM
To Next Page
Loading...
