Radio Shack DX-394 - Understanding Your Receiver Controls; Front Panel Controls; Keypad and Mode Controls; Timer and Display Controls

UNDERSTANDING YOUR RECEIVER.
A LOOK AT THE CONTROLS
А quick glance at this section should help you understand each control's function.
VOLUME — adjusts the sound level.
RF GAIN — adjusts the recoiver's sansi-
tivity
MODE — sets the receiving mode.
FINE TUNE — ine tunes the reception
nal, ily when you tune to SSB
ага OW.
Main Tuning Knob — selects frequen-
cies.
STEP A, STEP Y — solacis tho 0.1, 1,5,
or 10 (9) kHz tuning frequency step
sequentia ly
TIME SET — sets the builtin clocks.
SLEEP — tums off the receiver after 30 or
60 minutes.
DIMMER
—
selects
two
levels
of
display
back
lighting
brightness.
POWER — turns the power on and of.
TIMER — sets the bult-n clocks and
turns the imer on or of
NB — tums noise blanker cn and off.
MON — stores the current frequency into
a monitor memory and recalls the fre-
quency from memory.
12
LOCK — disables the main tuning knob
and ай buttons охсор! POWER and LOCK
to prevent accidental operator,
LIMIT — turns on tha limit modo ard sats
the frequency range.
BAND — selects LW (150-506.9 kHz),
MW (5:0-1729.9 kHz), or SW (175-
29.9999 MHz) sequentially
METER — colocts cno of tho 13 Intorna-
tonal Broadcasting Bando.
FREQ
—
directly
tunes
to
the
frequency
with
number
and
decimal
keys.
А and Y — tuno up or down, eoloct tho.
higher or lower limit froquercy in the limit
mede and the search direction in the Imt,
bard, and meter modos.
CLEAR — clears an incorrect entr.
POM — turns on the program mode tc set
а limit frequency, store a frequency or set
‘he timer.