Radio Shack DX-394 - Receiver Operation Customization; MW Tuning Increment Change; Lock Button Functionality; Dimmer Button and ATT Switch

CHANGING THE MW TUNING
INCREMENT
In the United States, the MW band fre-
quoncias
step
in
10
kHz
increments.
In
‘Sore countries, tha MV band frequencies
step in 9 kHz increments. Your receiver
has the capability to shi between these
lav sep increments, Here is how to
‘change the step.
1. Press POWER to tur off the receiver
2. While pressing STEP A or STEP Y,
prosa POWER.
CO c
moods
Tho 10 KHz step is changed to 9 KHz сг
vice versa. If you want to change it back,
rapoat the procedure.
USING THE DIMMER
BUTTON
То light up tho display, preas the DIMMER
tution. To tum ofl the lighting. press the
DIMMER button again.
USING THE LOCK BUTTON
To prevent accidental frequency changes,
press the LOCK button. This prevents you
trom changing main tuning knob and all
buttons. except POWER and LOCK. To
unlock the controls, press the LOCK but-
ten agair.
کے کے کے کے کا
E󰾰 کے کے کے ص
USING THE ATT SWITCH
To
reduce
intortoronco
or
roiso
caused
by
signals
trom
a
strong
local
broadcaster,
you
can
reduce
the
receiver's
sensitivity
by
seting
the
ATT
(attenuate)
switch
or
the
back
of
he
receiver
Switch ATT то 20 dB fo reduce the
receiver's soneitivily, or 0 dB for normal
sensitivity.
* " you swich ATT to 20 dB, your
rocoivor might not receive weak sig-
rals.
+
ine
ATT
switch
affects
only
the
antonna
connected
to
the
ANT
10-2
terminal.
19