Radio Shack DX-394 User Manual

Using Your Vehlcte's Battery
You сап also power your receiver from.
your vehicle's cigarette lighter soceet with
an optional DC cigarette ligror power
cable (not supplied).
lighter power cable that supplies 12 volts
and delivers at least 500 mA. Its center ip.
must
bo
set
to
positive
and
ks
plug
must
correctly
tk
the
DC
13.8
V jack
on
the
back
of
the
receiver.
The
recommended
power
cable
moets
these
specications.
Using
a
ромог
cablo
that
does
nat
meet
these
specifications
could
damage
the
receiver.
or
tne
power
cable,
Insert the DO power cable's tarl plug
into the DC 13.3V jack on the back of the
receiver. tien plug the power cable into
your vehicle's cigarette lighter socket.
DC
13.8V
Jack
à
2.
P
lis
Clgaretie Lighter
Socket
RESETTING THE RECEIVER
I the receiver's display locks up or the
receiver does not work properly after you
‘connect
power,
you
might
need
to
reset
the receiver
Caution: This procedure clears al the
{formation you have programmed inta
the receiver. Use this procedure only
‘when you are sure your recalver is not
working property.
Insert a pointed object, such as а straight-
‘ened nape" clip, into the RESET hoe on
the back of tho receiver, then remove it
Tho Clock 1 time display flashes (soo
“Saning the Clocks."

Radio Shack DX-394 Specifications

General

Brand	Radio Shack
Model	DX-394
Category	Receiver
Language	English