Radio Shack DX-394 User Manual

PREPARATION
Whon
you
aro
deciding
where
to
sot
up.
the
receiver,
you
should
consider:
LOCATION. You will sperd many nours
listening to your receiver, be sure it is
placed where you can enjoy it a: any timo.
This receiver is prirrarily designed for use
in the home as a base station. You can
Place it on a desk, shell, or table.
ANTENNA. For maximum performance,
you
need
an
срїога!
external
long-wire
antenna, such as a short wave antenna
‘that will ba rrounted outside.
GROUNDING. For safety, you should
connect a ground wire to the receiver,
‘This requies running a ground wire from.
һе ground screw connection on the back
ol the receiver to а ground connection,
‘such аз а matal cold water pipa or metal
pipe driven into the earth.
Your receivers front feet fold up or down.
Adjust tham to give you tho best view of
the display.
THE ANTENNA
To
attach
the
supplied
telescoping
antenna,
simply
sorew
it
clockwise
inte
the
hole
on
the
receiver's
top.
For the best reception, fuly extend the
antenna,
The telescoping antenna is adequate lor
strong local signals. However, i you use
an external antenna, you can receive
"roro, strong signal.
No single antenna covers the entire fre
quency range of the DX-394 elícienly,
bul tera are many diferent typus ol
antennas you сап use. Your local Radic
ShackiTendy store sells а wido variety of
antennas. Choose the ore that best sul
your needs.
For a simplo, all-purpose antenna, uso tho
long-wre type. The horizontal section of
the antenra should be more than 10
maters (30 feet). Mount the antenna as
high as possiole (mere than 5 meters (15
feet) trom the ground and away from
power
lines,
buildings,
and
metal
struc-
tures. Connect the antennz's phono plug
to the ANT MZ jack on the back of the
receiver

Radio Shack DX-394 Specifications

General

Brand	Radio Shack
Model	DX-394
Category	Receiver
Language	English