Radio Shack PRO-650 - Scanner Operation; Powering and Turning On

10 11
MAR – Search the preprogrammed marine bank.
FD/PD–Searchthepreprogrammedre/policebank.
–Searchthepreprogrammedweatherbank,orpress
andholdtojumptotheSkywarnchannel.Youmustrst
program your local Skywarn frequency into channel 200
(seepage22).
HAM – Search the preprogrammed amateur radio bank.
AIR – Search the preprogrammed aircraft bank.
FM–SearchFMradiostations.
SCAN / MAN (Manual)–EnterScanmodetoscan
programmedchannels.EnterManualmodetostop
scanning,directlyenterachannelnumber,ormonitora
single channel.
  – Select the direction for searching and scanning.
PRI / ALERT–Enableanddisablethepriorityfeature.
EnableanddisableSAMEstandbymodewhen
monitoring a weather channel.
PSE (Pause) – Stop and restart a search or tune.
0–9 – Input numbers when entering frequencies and
selectingbanks(0selectsbank10).Thenumberrange
abovethekeys(1–20,21–40,41-60,etc.)indicatesthe
channels stored in that bank.
• / DELAY – Input a decimal point when entering
frequencies. Set a two-second delay for a selected
channel.
ENT (Enter)–Completetheentryofafrequency.
L/O
/
L/O RV W – Lock-out selected channels or
frequencies. Review locked-out frequencies.
TUNE / CLEAR–EnterTunesearch.Clearanincorrect
entry.
PGM – Program frequencies into channels.
Understanding the Keypad