To unlock all channels in the banks that are turned on, press MAN to stop
scanning, then hold down L-OUT/S/S until the scanner beeps twice.
PRIORITY
The priority feature lets you scan through channels and still not miss
important or interesting calls on specific channels. You can program one
stored channel in each bank as a priority channel (up to 10 stored
channels). As the scanner scans the bank, if the priority feature is
turned on, the scanner checks the priority channels every 2 seconds for
activity.
The scanner automatically designates each bank's first channel as its
priority channel. Follow these steps to select a different channel as the
priority channel for a bank.
1. Press PROG.
2. Enter the channel number you want to select as the priority channel,
then press PRIORITY/H/S. P appears on the display to the right of the
channel number.
3. Repeat Steps 1-2 for the channel in each bank you want to program as a
priority channel.
To confirm all priority channel numbers, press PROG, then repeatedly
press PRIORITY/H/S to see the priority channels.
To turn on the priority feature, press PRIORITY H/S during scanning.
PRI appears on the display and every 2 seconds the scanner checks the
To Next Page
Loading...
