L-OUT/S/S - lets you lock out a selected
channel; skips a specified
frequency during a limit, direct
or service search.
KEYLOCK/ - locks the keypad to prevent
accidental program changes;
turns on the display light for
15 seconds.
DELAY - programs a 2-second delay for
the selected channel.
Down and Up Arrow - enter the down or up search
direction.
Number Keys - each key has a single digit,
with a range of numbers printed
above it. The single digits
refer to the number of a channel
or frequency entered. The range
of numbers (21-40, for example)
indicates the channels that make
up a memory bank. Also, number
keys 1-4 are used as the air
traffic (AIR), marine traffic
(MRN), fire department activity
(FIRE), and weather reporting
(WX) band keys.
CLEAR/. - erases an incorrect entry or an
error; enters the decimal point
in a frequency.
0/HOLD - enters the number 0; pauses the
frequency search.
E - enters the frequency when you
program channels.
A LOOK AT THE DISPLAY
The display has indicators that show the scanner's current operating mode.
A good look at the display will help you understand how to operate your
scanner.
MON - appears during search modes or
when you listen to a monitor
memory. The number to the right
of this indicator shows the
current monitor memory number.
BATT.Lo - flashes when the battery is low.
K/L - appears when you lock the
keypad.
To Next Page
Loading...
