priority channel in each bank that is turned on, starting from the
lowest numbered to the highest-numbered priority channel.
To turn off the priority feature, press PRIORITY/H/S. PRI disappears.
Notes:
The priority feature must be turned off to listen to monitor
memories or to use the data skip feature.
You can lock out priority channels. If you lock out all priority
channels, the display shows LOC OUt when you turn on the priority
feature.
USING THE KEYLOCK
Once you program your scanner, you can protect it from accidental program
changes by turning on the keylock feature. When locked, the only controls
that operate are SCAN, MAN, KEYLOCK/, VOLUME/OFF, and SQUELCH.
Note:
The keylock does not prevent the scanner from scanning channels.
To turn on the keylock, press and hold KEYLOCK/ until K/L lights on
the display. To turn it off, press and hold KEYLOCK/ until K/L
disappears.
USING THE DISPLAY BACKLIGHT
You can turn on the display light for easy viewing at night. Press KEY-
To Next Page
Loading...
