LOCK/ to turn on the display light for 15 seconds elapse, press the button
again.
CHANGING SEARCH SPEEDS
The PRO-67 has two search speeds.
Normal Search Hypersearch
100 steps/second 300 steps/second
To switch between the normal and Hypersearch speeds, during limit search
or direct search, press PRIORITY/H/S. HYPER appears on the display during
a Hypersearch.
Note:
You can use Hypersearch only in the 5 kHz step bands - 29-54 MHz and
137-174 MHz.
TURNING THE KEY TONE OFF/ON
To turn off the key tone, follow these steps.
1. Turn off the scanner.
2. While holding down L-OUT/S/S, turn on the scanner. OFF bEEP appears.
To turn the key tone back on, repeat Steps 1-2 so on bEEP appears.
TURNING THE BATTERY SAVE FUNCTION OFF/ON
To Next Page
Loading...
