BANK - shows which channel-storage
banks are turned on for the scan
mode.
DATA - appears when you turn on the
data skip function.
(Note: The Data Skip function
does not work in the AIR band).
AIR - appears when you search the
preset frequencies in the air
traffic search bank.
MARINE - appears when you search the
preset frequencies in the marine
service search bank.
FIRE - appears when you search the
preset frequencies in the fire
service search bank.
WX - appears when you search the
preset frequencies in the
weather service search bank.
HYPER - appears when the scanner is in
scan mode or in the Hypersearch
mode during limit and direct
search. However, the indicator
disappears when the scanner
searches the frequency bands
other than in 5 kHz step bands.
CH - digits that precede this
indicator show which of the
200 channels the scanner is
tuned to.
P - appears when you listen to a
priority channel.
MHz - digits that precede this
indicator show which frequency
the scanner is tuned to.
5 appears directly above the MHz
indicator when the displayed
frequency is an odd multiple of
12.5 kHz (for frequencies
between 406 MHz and 1 GHz, or
108-136.975 MHz).
SCAN - appears when you scan channels.
MAN - appears when you manually select
a channel.
PGM - appears while you program
frequencies into the scanner's
To Next Page
Loading...
