channels.
PRI - appears when you set the scanner
to scan the priority channels
every 2 seconds.
L/O - appears when you manually select
a locked channel or a skip
frequency.
DLY - appears when you listen to a
channel programmed with the
delay feature.
S - appears when the battery save
function is active.
Down and Up Arrow - appears during a limit, direct,
or service search.
-d- - appears during a direct search.
-L- - appears during a limit search.
-h- - appears during a direct search
hold.
-H- - appears during a limit search
hold or service search hold.
Error - appears when you make an entry
error.
UNDERSTANDING BANKS
Service Banks
The scanner is preprogrammed with all the frequencies allocated by the
aircraft, marine, fire-fighting, and weather services. This is handy for
quickly finding active frequencies instead of searching through an entire
band.
Channel Storage Banks
To make it easier to identify and select the channels you want to listen
to, channels are divided into 10 banks of 20 channels each. Use each
channel-storage bank to group frequencies, such as the police department,
fire department, ambulance services, or aircraft (see "Guide to the Action
Bands," Faxback Doc. # 38892).
For example, the police department might use four frequencies, one for
each side of town. You could program the police frequencies starting with
Channel 1 (the first channel in bank 1) and program the fire department
frequencies starting with Channel 21 (the first channel in bank 2).
Monitor Storage Bank
The scanner also has one bank of 10 temporary memory locations. You can
To Next Page
Loading...
