stored in memory for up to
3 days during a power loss.
Lockout Function - keeps channels you select from
being scanned.
Priority Channel - checks up to 10 of your most
important channels every
2 seconds so you don't miss
transmissions on those channels.
Monitor Memories - let you temporarily store up to
10 frequencies you locate during
a frequency search.
Search Skip - lets you select up to
20 frequencies for the scanner
to skip during a limit, direct,
or service search, to avoid
unwanted frequencies.
Hypersearch - lets you set the scanner to
search at 300 steps/second
(in 5 kHz steps only).
Data Signal Skip - skips non-modulated signals or
data signals during a limit,
direct, or service search, or
channel scan.
Key Conformation Tones - the scanner sounds a tone when
To Next Page
Loading...
