Searching the One Touch Banks
30
channel and do not want to miss
any details – even though there
might be periods of silence – or if
you simply want to monitor that
channel.
Follow these steps to manually
select a channel.
1. Repeatedly press
SCAN/MAN
until
C7D
C7DC7D
C7D
appears.
2. Enter the channel number
(1-200).
3. Press
SCAN/MAN
again.
%NGCTKPI"C"5VQTGF"%JCPPGN
If you no longer want a frequency
stored in a channel (and you do
not want to replace that frequency
with a different one), follow these
steps to clear the stored
frequency.
1. Press
SCAN/MAN
to stop
scanning.
2. Use the number keys to enter
the channel number (1-200)
you want to clear.
3. Press
PGM
.
F=C
F=CF=C
F=C
appears.
4. Press
0
then
ENT
. The
frequency number changes to
&&&$&&&&
&&&$&&&&&&&$&&&&
&&&$&&&&
to indicate the
channel is cleared.
.KUVGPKPI"VQ "VJG"
/CTKPG"$CPM
To listen to the marine bank, press
MAR
.
C7h
C7hC7h
C7h
appears for about 2
seconds, then the scanner starts
searching from marine channel 16.
20-315.fm Page 30 Wednesday, July 24, 2002 2:27 PM
To Next Page
Loading...
