EasyManua.ls Logo

Radio Shack PRO-82 - Using Tune

Radio Shack PRO-82
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Searching the One Touch Banks
27
1. To store the displayed
frequency in the lowest
available channel in the
assigned channel-storage
banks, press
ENT
when you
find a frequency. The channel
number flashes.
2. Press
ENT
again to store the
frequency. The channel and
frequency flash twice. If you
want to cancel the operation,
press
TUNE/CLEAR
instead of
ENT
.
To scan the channel-storage
banks, press the one touch bank
key, then
SCAN/MAN
while
<?h;%
<?h;%<?h;%
<?h;%
FEb_9;
FEb_9;FEb_9;
FEb_9;
,
7?h
7?h7?h
7?h
, or
>7C
>7C>7C
>7C
appears.
±
If there is no empty channel at an
available bank,
XýNý#<KBB
XýNý#<KBBXýNý#<KBB
XýNý#<KBB
(where
N
NN
N
is the bank number) appears after
you press
ENT
. To store more
frequencies, you must clear some
channels. See “Clearing a Stored
Channel” on Page 30. To continue
searching after
XýNý#<KBB
XýNý#<KBBXýNý#<KBB
XýNý#<KBB
appears,
press
TUNE/CLEAR
.
7UKPI"6WPG
You can set the scanner to search
through all receivable frequencies
from a specified frequency. You
can use the scanner's delay
feature while using tune.
±
1. Repeatedly press
SCAN/MAN
until
C7D
C7DC7D
C7D
appears.
2. Enter the desired channel
number you want to use as a
starting point for the tune.
Then press
SCAN/MAN
again.
±
"016'"
±
"
Searching the
One Touch Banks
If you entered a
frequency that is
already stored in
another channel,
#ZKFB#
#ZKFB##ZKFB#
#ZKFB#
(duplicate)
and the lowest-
numbered channel
containing the
duplicate frequency
flash for about 3
seconds. If you want
to store the frequency
anyway, press
ENT
again. You can then
delete the frequency
later. See “Clearing a
Stored Channel” on
Page 30.
Using Tune
To reverse the
tuning direction at
any time, hold
down
H
or
G
for
about 1 second.
To tune up or down
the selected band
in small increments
(5 or 12.5 kHz
steps), repeatedly
press
H
or
G
.
To pause tuning,
press
H
or
G
. To
resume tuning,
hold down
H
or
G
.
To quickly move
up or down
through the
frequencies, hold
down
H
or
G
. The
scanner tunes
through the
frequencies until
you release
H
or
G
.
20-315.fm Page 27 Wednesday, July 24, 2002 2:27 PM

Table of Contents

Related product manuals