Special Features
33
52'%+#."('#674'5
&GNC[
Many agencies use a two-way
radio system that has a period of
several seconds between a query
and a reply. To avoid missing a
reply, you can program a 2-
second delay into any channel or
frequency. When your scanner
stops on a channel or frequency
with a programmed delay,
:BOý
:BOý:BOý
:BOý
appears and the scanner
continues to monitor that channel
or frequency for 2 seconds after
the transmission stops before
resuming scanning, searching, or
tuning.
You can program a 2-second
delay in any of these ways:
• If the scanner is scanning and
stops on an active channel,
quickly press
DELAY
/
´
before
it resumes scanning.
• If the desired channel is not
selected, manually select the
channel, then press
DELAY
/
´
.
• If the scanner is searching or
tuning, press
DELAY
/
´
.
:BO
:BO:BO
:BO
appears and the scanner
automatically adds a 2-
second delay to every
transmission it stops on in
that band.
To turn off the 2-second delay in a
channel or for all frequencies,
press
DELAY
/
´
while the scanner is
monitoring that channel or
frequency.
:BO
:BO:BO
:BO
disappears.
20-315.fm Page 33 Wednesday, July 24, 2002 2:27 PM
To Next Page