Preparation
14
• Set the volume to zero before
putting on the headphones.
With the headphones on,
adjust the volume to a
comfortable level.
• Avoid increasing the volume
once you set it. Over time,
your sensitivity to a volume
level decreases, so volume
levels that do not cause
discomfort might damage
your hearing.
• Avoid or limit listening at high
volume levels. Prolonged
exposure to high volume
levels can cause permanent
hearing loss.
6TCHHKE"5CHGV[
Wearing headphones while
operating a motor vehicle or riding
a bicycle can create a traffic
hazard and could be illegal in
some areas.
Even though some headphones
let you hear some outside sounds
when listening at normal volume
levels, they still can present a
traffic hazard. Exercise extreme
caution!
%100'%6+0)"#0"
':6'05+10"52'#-'4
In a noisy area, an amplified
speaker (not supplied), available
at your local RadioShack store,
might provide more comfortable
listening. Plug the speaker cable's
1
/
8
-inch (3.5 mm) mini-plug into
your scanner's jack.
±
±
"016'"
±
"
You must use an
amplified speaker
with this scanner.
Non-amplified
speakers do not
provide sufficient
volume for
comfortable listening.
20-525NEW.fm Page 14 Monday, July 1, 2002 2:58 PM
To Next Page
Loading...
