About the Keypad
17
TRUNK
— stores the trunking ID
code or holds the trunking ID while
scanning.
PRI
(Priority) — sets and turns the
priority function on or off.
TEXT
— lets you input text.
PAUSE
— stops search.
MODE
— changes the receive
mode (AM, FM, MOT, ED).
/ — turns on/off the
display's backlight or when used
with
FUNC
locks/unlocks the
keypad to prevent accidental
entries.
TUNE
— lets you input a frequency
and allows you to fine tune a
frequency along with
8
88
8
or
9
99
9
.
ATT
(Attenuate) — turns
attenuation on to reduce the
scanner's sensitivity and block
extremely strong signals, or turns
it off to increase sensitivity.
8
88
8
or
9
99
9
— selects the scan or
search direction.
SEARCH
— lets you search the six
search banks.
L/OUT
(Lock Out) — lets you lock
out a selected channel, skip a
specified frequency during search,
or lock out a selected ID code.
PGM
— programs frequencies into
channels.
ENTER
— completes the entry of
frequencies and text.
20-525NEW.fm Page 17 Monday, July 1, 2002 2:58 PM
To Next Page
Loading...
