Special Features
48
the scanner has one priority
channel.
With the priority feature, you can
scan through programmed
channels and still not miss an
important or interesting
transmission on a specific
channel. When priority is turned
on, the scanner checks that
channel every 2 seconds, and
stays on the channel if there is
activity until the activity stops.
±
To program a frequency in the
priority channel:
1. Press
MANUAL
.
2. Use the number keys to enter
the channel number which
contains the frequency you
want to program as the
priority channel. Then press
MANUAL
again.
3. Press
FUNC
then
PRI
.
Fh_ý
Fh_ýFh_ý
Fh_ý
9^Wdd[b
9^Wdd[b9^Wdd[b
9^Wdd[b
blinks on the bottom
line.
To program the priority channel
directly:
1. Press
PGM
.
2. Press
PRI
.
3. Enter the frequency you want
to enter into the priority
channel, then press
ENTER
.
To program a weather channel as
the priority channel:
1. Press
WX
.
±
"016'"
±
"
• The priority
feature does not
operate while the
scanner receives
a trunking voice
channel or during
trunking delay
time. Therefore,
the priority check
seems random
during peak hours.
• If you program a
weather channel
as the priority
channel, the
scanner stays in
the priority
channel only when
the scanner
detects the
weather alert tone
• This scanner
cannot set a
channel as the
priority channel if
the channel's
receive mode is
MOT or ED.
20-525NEW.fm Page 48 Monday, July 1, 2002 2:58 PM
To Next Page
Loading...
