68
Beyond the Basics
one at a time, repeat the sequence of PGM, FUNC then e or
d until you reach the desired bank.
2. Press TRUNK to enter the ID program mode.
3. Repeatedly press MODE to select Motorola, EDACS (GE/
Ericsson), or LTR (EF Johnson) system to scan. This sets
the talk group ID decoding method to be used for the
bank.
If you select conventional mode instead of Motorola,
EDACS, or LTR, the scanner does not scan trunked
frequencies. Trunking mode not selected, press Mode key.
appears.
4. Press PGM to enter the program mode.
5. Enter the desired trunking frequency then press ENT to
store.
To Next Page
Loading...
