Radio Shack PRO-97 - Assigning a Text Tag to a Group ID; Assigning a Tex Tage to a Bank

35
Beyond the Basics
Press 6 then 1.
• A space is entered by pressing ./DELAY.
• “6” is the sixth number associated with 1 on the
keypad. Press 1 then 6.
• “m” is the fi rst letter associated with 6 on the keypad.
Press 6 and FUNC (for the lower case set), then press 1.
5. Press ENT to input the text.
assigning a text tag to a group ID
1. Press PGM.
2. Press TRUNK.
3. Press FUNC then
e or d to select the desired bank.
4. Press TRUNK to select the desired sub-bank.
5. Press or hold down
e or d to select the desired group ID.
6. Press TEXT then enter the tag using the keypad. (See “Text
Input Chart”).
7. Press ENT to store.
assigning a text tag to a bank
1. Press PGM.
2. Press FUNC then press bank number. Bank X (0 through
9) selected. Fn+CLR to delete all frequencies, TEXT to edit tag
appears.
3. Press TEXT, then enter the text using the keypad.
4. Press ENT to store.